超碰国产老女露脸,碰超老师免费视频在线,feetweek,啦啦啦手机在线观看视频8

網站首頁 關于我們 產品展示 新聞中心 應用案例 銷售網絡 在線留言 聯系我們
產品分類
 進口電磁閥
 進口蝶閥
 進口球閥
 進口調節閥
 進口疏水閥
 進口截止閥
 進口減壓閥
 進口閘閥
 進口流量計
 進口止回閥
 進口真空閥
 進口低溫球閥
 進口低溫截止閥
 進口低溫安全閥
 進口低溫過濾器
 進口磁力泵
 進口隔膜泵
 進口離心泵
 進口化工泵
 進口計量泵
 進口消防泵
 進口真空泵
 進口轉子泵
 產品搜索
 業務聯系
 人才招聘
 客服電話
 在線聯系
   首頁 - 產品展廳 - 產品介紹  
  產品名稱: 進口S型單級雙吸離心泵
  產品型號:
 
 
  咨詢電話:0752-5588737 黃東
 相關產品
 進口低轉速立式離心泵
 進口臥式單級單吸清水離心泵
 進口水力噴射器
 進口單級單吸全不銹鋼耐腐蝕離心泵
 

進口S型單級雙吸離心泵是新型節能臥式中開泵,供輸送清水或物理化學性質類似于水的其他液體,根據用戶需求,通過改變泵結構及材質可用于輸送多泥砂水或各類腐蝕性液體,該系列泵適用于工廠、礦山、城市給排水、電站、農田排灌及各種水利工程。

S-type single-stage double-suction centrifugal pump is a new energy-saving horizontal split pumps for conveying water or physical and chemical properties similar to other liquid water, according to user needs, by changing the pump structure and material can be used for all types of transport more water or silt corrosive liquids, this series of pumps suitable for factories, mines, urban water supply and drainage, power, agricultural irrigation and various water projects.

結構說明Structure Description

 本型泵的吸入口與吐出口均在水泵軸心線的下方,與軸線垂直成水平方向。檢修時無需拆卸進出口水管及電機。從傳動方向看去,水泵為順時針?lè)较蛐D(zhuǎn)(根據用戶需要亦可改為逆時針?lè)较蛐D(zhuǎn))。
 泵主要零件有:泵體、泵蓋、葉輪、軸、雙吸密封環、軸套等。
 泵體與泵蓋構成葉輪的工作室。在進出水法蘭上,制有安裝真空表和壓力表的管螺孔。進出水法蘭的下部,制有放水的管螺孔。
 經過靜平衡校驗的葉輪,用軸套和兩邊的軸套螺母固定在軸上,其軸向位置可通過軸套螺母進行調整。
 泵軸由兩個單列向心球軸承支承。軸承裝在軸承體內、安裝在泵體兩端,用黃油潤滑。
 雙吸密封環用以減少水泵壓水室的水漏回吸水室。
 泵通過彈性聯軸器由電動機直接傳動,必要時亦可用內燃機傳動。
 軸封為軟填料密封(根據用戶需要可采用機械密封結構)。

 Inlet and outlet of the pump is in the bottom of the pump axis line, perpendicular to the horizontal axis. Import and export without removing the pipes and motor overhaul. Viewed from the direction of transmission, the pump is clockwise (according to user needs can also be changed to counter-clockwise).
 Pump main parts: pump, pump cover, impeller, shaft, double suction seal rings, bushings and the like.
 Pump and pump cover constitute studio impeller. Out of the water in the flange, install the vacuum gauge and pressure gauge tube screw. The lower flange out of the water, turn on the water pipe is formed with holes.
 Static balance check impeller, with both sides of the sleeve and the sleeve nut on the shaft, the axial position can be adjusted through the sleeve nut.
 Shaft by two single row radial ball bearing. Bearings mounted in bearing the body, mounted on both ends of the pump body with grease lubrication.
 Double suction seal ring to reduce water pump pressurized water chamber to drain back to the suction chamber.
 Pump through flexible coupling directly by the drive motor, the internal combustion engine can also be used when necessary drive.
 Seal soft packing seal (according to user needs can be mechanical seal).

友情連接: 百度 | 儀器供應商 | Equipment Series | 離合器 | 億商網 | 中國商業港 |
Copyright 2005 hitachifm.com All Rights Reserved. 惠州費希爾閥門有限公司 版權所有
地址:廣東省惠州市大亞灣區石化大道中438號新華聯廣場10棟 電話:0752-5588737 粵ICP備19021819號-1